Gebruikershulpmiddelen

Site-hulpmiddelen


overig:compaq:softpaq:start

Softpaqs

SoftpaqTitel
sp0001ETETRIS.COM is an executable file for use with any Compaq computer that is experiencing screen flicker when running the program ETETRIS.EXE.
sp0002PQ416_4 contains preliminary versions of enhanced drivers for the Compaq Dual-Speed Token Ring adapter, allowing up to four adapters to be configured in a Novell NetWare 286 server with TTS.
sp0003DOS31AB.COM patches IBMBIO.COM in Compaq DOS 3.10 rev A & B so that dBASE IV rev 1.1 will print to a printer properly.
sp0004This program allows the Compaq Deskpro 386 machines to run the IBM PS/2 Graphics Workstation Program.
sp0005KT_FIX is a program for use with any Compaq computer that is experiencing difficulty executing the 1784-KT software.
sp0006THE PROGRAM NWCEMM.EXE ALLOWS NEWWAVE TO BE INSTALLED WITH CEMM AS THE EXPANDED MEMORY MANAGER FOR WINDOWS/NEWWAVE.
sp0007This program alters the BIOS Shadow RAM area to insert the correct timer value for Mode Speed Auto, allowing the mouse cursor to move properly.
sp0008TDS_PEN contains loader programs for software published by TDS Health Care Systems. Without these loaders, the TDS light pen boards fail to initialize in Compaq products.
sp0009This program resolves lock-up or time-out problems when running NetBIOS applications under Microsoft Windows 3.0 on any Compaq 386
sp0010This program is for use with any COMPAQ computer using WINDOWS/386 while running Novell network with PLAN adapter from IQ Technology.
sp0011This program is for use with any 386 COMPAQ Computer products experiencing problems with the cursor when running the DOS 4.01 graphics shell environment.
sp0012DATAP.EXE is a TSR program for use with a COMPAQ computer which is experiencing timeout errors with the "DATA PHYSICS CORPORATION" solution in signal processing software with a DP420 board.
sp0013This Softpaq diskette contains CEMM Version 4.21 to replace CEMM Version 4.20.
sp0014This program is a utility file for use with any COMPAQ computer experiencing Enhanced Keyboard errors when using the IBM DOS 3.30 KEYB.COM feature in the National Language Supplement Function.
sp0015This program is to correct the state of the COM1 serial I/O port and transmit buffer empty status bits.
sp0016VIDSAVE.COM is a utility program for use with QUARTERDECK's DESKVIEW software. It saves the video mode at the time DESKVIEW is started and restores it upon exit.
sp0017This is a utility that enables use of drive with a sector size greater than 512 bytes for COMPAQ MS-DOS 3.3 REV C or REV D only. Note: Do not use with the similar utility BIGFILE. EXE.
sp0018This is a utility that enables use of drives with a sector size greater than 512 bytes for COMPAQ MS-DOS 3.31 Rev C or Rev D only. Note: Do not use with the similar utility BIGFILE.EXE.
sp0019This is a utility that enables use of drives with a sector size greater than 512 bytes for COMPAQ MS-DOS 3.31 Rev E, F, or Rev G only.
sp0020This program allows COMPAQ System Configuration Program (CF.EXE) version 1.10 to run in a COMPAQ SYSTEMPRO with only 512K of base RAM enabled.
sp0021This program allows the COMPAQ SYSTEMPRO Base Memory to be set at 512K. This permits boards to map memory from 512 to 640K, such as the BANYAN ICA Card.
sp0022This device driver is intended to prevent shared memory errors on 386 and 486-based COMPAQ products which can be seen running Microsoft WINDOWS 3.0, with Quarterdeck Systaems MANIFEST.
sp0023This is a TSR which is for use with COMPAQ SLT products that cannot detect properly an externally connected Zenith Data Systems FTM 1490 Monitor.
sp0024This program is used to prevent speed-related problems found on COMPAQ 20Mhz 80386 or more powerful products with 3COM 3PLUS Versions 1.2 and 1.3.1.
sp0025This is a TSR that allows any COMPAQ CPU with VGA to run the IBM SERIES/1 INTELLIGENT WORKSTATION Version 2.0 and to get a proper screen display.
sp0026This is a new version of CHKDSK that fixes a data corruption problem found in MS-DOS 3.31 Rev's A through E on 509-512MB partitions. This also corrects some former Memory Allocation Error problems.
sp0027This file prevents the Gateway Communications 16-bit G/Ethernet Network Adaptor Card from changing the system speed during boot, under Novell NetWare 2.0a, ELS I, 2.1, 2.11, 2.12, ELS II, and 2.15.
sp0028This is a replacement version of KEYBDP. COM for MS-DOS 3.31 Rev D or earlier and COMPAQ USER PROGRAMS 6.02 and earlier. The old versioninterfered with Novell PCOX 3270 keyboard usage.
sp0029This is a utility designed to enable COMPAQ Monochrome VGA displays to show the correct gray-scale colors when another Monochrome Video Device is in use in addition to the COMPAQ VGA.
sp0030This device driver enables an IBM Enhanced Graphics Adaptor (EGA) to be run in any COMPAQ 80486-based system. Otherwise it comes up in 40 cloumn mode and nver gets full EGA functionality.
sp0031This device driver is needed for versions of MS OS/2 BEFORE Version 1.2x, to support a mouse attached to the Pointing Device Interface Port on COMPAQ System Units.
sp0032This program will prevent system lockup and screen display problems seen with COMPAQ 80386-based systems running NURSING STAFFING PROGRAM by Medical Information Processing Systems, Inc.
sp0033This device driver is used with COMPAQ Enhanced Graphics Adaptors (EGA) and Video Graphics Adaptors (VGA) attached to a NEC Multi-Synch II Monitor to enable them to maintain synch.
sp0034This program is needed for any COMPAQ Video Graphics Adaptor (VGA) equipped machine running IBM Personal Communications 3270 Package version 1.01, level 0. Otherwise the machine can appear to lock up.
sp0035This is a program for units using the COMPAQ SLT keyboard while running Packet/PC Inc's 3270 Emulation Package. Without it, the keyboard may not work correctly.
sp0036This program fixes problems with the COMPAQ Plasma Display under which the cursor may disappear without warning.
sp0037This utility alters the image in memory of two files from Harvard Graphics Version 2.12, enabling the program to be run on the COMPAQ LET386s/20 without locking up during screen scroll commands
sp0038LTPENDRV.SYS is a driver to be used with CBTP.COM or PCMIS.COM files on most COMPAQ computers with VGA using TDS light pen software.
sp0039This is a TSR that should be loaded before running the IBM RTIC Diagnostics on a COMPAQ DESKPRO 386/20e. Without it, the unit fails the IBM Diagnostics.

Discussie

Geef je reactie:
Als je de letters in de afbeelding niet kunt lezen kun je dit .wav bestand downloaden om ze te laten voorlezen.
 
overig/compaq/softpaq/start.txt · Laatst gewijzigd: 08-01-2022 door michel

Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki