overig:compaq:softpaq:sp0030
Verschillen
Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.
Beide kanten vorige revisieVorige revisieVolgende revisie | Vorige revisie | ||
overig:compaq:softpaq:sp0030 [08-01-2022] – aangemaakt michel | overig:compaq:softpaq:sp0030 [08-01-2022] (huidige) – aangemaakt michel | ||
---|---|---|---|
Regel 3: | Regel 3: | ||
---- dataentry compaq_softpaq ---- | ---- dataentry compaq_softpaq ---- | ||
Extensie | Extensie | ||
- | Grootte | + | Grootte |
- | Titel : This device driver | + | Titel : This device driver |
Versie | Versie | ||
Taal : | Taal : | ||
Regel 15: | Regel 15: | ||
^ Bestand | ^ Bestand | ||
- | | CONFIG.SYS | + | | MNMIHEEM.DOC | |
- | | NECIIFIX.DOC | | + | | MNMIHEEM.SYS | |
- | | NECIIFIX.SYS | | + | |
===== Tekst-bestanden ===== | ===== Tekst-bestanden ===== | ||
- | <file txt CONFIG.SYS> | + | <file txt MNMIHEEM.DOC> |
- | device=neciifix.sys | + | |
- | + | INSTALLATION INSTRUCTIONS | |
- | </ | + | |
- | April 15, 1988 | + | |
- | Problem: NEC Multisync II snaps, pops and loses video during a mode | + | INTRODUCTION: |
- | change. | + | |
- | Solution: | + | MNMIHEEM.SYS is a program executed from CONFIG.SYS that allows an IBM |
- | DRIVER=NECIIFIX.SYS | + | EGA adapter |
- | This driver will prevent the problem except during power-up or boot. | + | |
- | The EGA ROM must be changed | + | |
- | + | ||
- | <file txt NECIIFIX.DOC> | + | |
+ | |||
+ | SYSTEM REQUIREMENTS: | ||
+ | |||
+ | Any Compaq system that: | ||
+ | | ||
+ | | ||
+ | | ||
+ | |||
+ | |||
+ | WHO SHOULD USE: | ||
+ | |||
+ | When an IBM EGA adapter is placed in a Compaq 486-based system, three | ||
+ | beeps (one very long, two long) occur during initialization. | ||
+ | machine then boots in 40-column mode. In an MS-DOS environment, | ||
+ | adapter can be returned to 80-column mode by typing MODE CO80 from a | ||
+ | DOS prompt, however, all EGA functionality is NOT regained. | ||
+ | |||
+ | |||
+ | HOW TO USE: | ||
+ | |||
+ | Copy the file MNMIHEEM.SYS to the disk or diskette you will be booting | ||
+ | from, using the DOS copy command: | ||
+ | |||
+ | copy a: | ||
+ | |||
+ | where d: | ||
+ | program is to be stored and the device from which to boot. | ||
+ | |||
+ | Using the file editor of your choice, place the following line as the | ||
+ | first line in the CONFIG.SYS file: | ||
+ | |||
+ | | ||
+ | |||
+ | When the system boots, the beeps described above still occur, but | ||
+ | shortly thereafter the screen goes blank for a short period and then | ||
+ | displays in 80-column mode. No installation messages are given. | ||
+ | |||
+ | EFFECTS ON YOUR SYSTEM: | ||
+ | |||
+ | After re-initializing the EGA adapter, this program leaves no residue | ||
+ | in your system. | ||
</ | </ |
overig/compaq/softpaq/sp0030.1641602793.txt.gz · Laatst gewijzigd: 08-01-2022 door michel