Verschillen

Dit geeft de verschillen weer tussen de geselecteerde revisie en de huidige revisie van de pagina.

--- overig:compaq:softpaq:sp0030 [08-01-2022] – verwijderd michel
+++ overig:compaq:softpaq:sp0030 [08-01-2022] (huidige) – aangemaakt michel
@@ Regel 1: / Regel 1: @@
+====== sp0030 ======
+---- dataentry compaq_softpaq ----
+Extensie  : zip
+Grootte   : 11 kB
+Titel     : This device driver enables an IBM Enhanced Graphics Adaptor (EGA) to be run in any COMPAQ 80486-based system.  Otherwise it comes up in 40 cloumn mode and nver gets full EGA functionality.
+Versie    :
+Taal      :
+Producten :
+OS        :
+Vervangt  :
+----
+===== Uitgepakte bestanden =====
+^ Bestand      ^
+| MNMIHEEM.DOC |
+| MNMIHEEM.SYS |
+===== Tekst-bestanden =====
+<file txt MNMIHEEM.DOC>
+                                MNMIHEEM.SYS
+                         INSTALLATION INSTRUCTIONS
+INTRODUCTION:
+    MNMIHEEM.SYS is a program executed from CONFIG.SYS that allows an IBM
+    EGA adapter to function properly in any Compaq 486-based system.
+SYSTEM REQUIREMENTS:
+    Any Compaq system that:
+.  Uses an Intel 486 processor.
+.  Has an IBM EGA adapter installed.
+.  Uses DOS version 3.0 or newer as its operating system.
+WHO SHOULD USE:
+    When an IBM EGA adapter is placed in a Compaq 486-based system, three
+    beeps (one very long, two long) occur during initialization.  The
+    machine then boots in 40-column mode.  In an MS-DOS environment, the
+    adapter can be returned to 80-column mode by typing MODE CO80 from a
+    DOS prompt, however, all EGA functionality is NOT regained.
+HOW TO USE:
+    Copy the file MNMIHEEM.SYS to the disk or diskette you will be booting
+    from, using the DOS copy command:
+         copy a:\mnmiheem.sys d:\path\mnmiheem.sys
+    where d:\path\mnmiheem.sys shows the drive and directory in which the
+    program is to be stored and the device from which to boot.
+    Using the file editor of your choice, place the following line as the
+    first line in the CONFIG.SYS file:
+         device=d:\path\mnmiheem.sys.
+    When the system boots, the beeps described above still occur, but
+    shortly thereafter the screen goes blank for a short period and then
+    displays in 80-column mode.  No installation messages are given.
+EFFECTS ON YOUR SYSTEM:
+    After re-initializing the EGA adapter, this program leaves no residue
+    in your system.
+</file>